Be prepared to be excited and overwhelmed when choosing from the many Elica pump styles that are available. Since all of their systems are quite extraordinary in appearance, they will definitely complement the interior of your home.

To ensure that the design you choose gives you optimal performance, it should be at least the same width as your range. You will also need to decide if it will be channeled outside your home. If so, you need to make sure that the duct is also the correct size so that it will draw out all the steam, grease and odors floating in the air.

Types of Elica fans

• Freestanding – Supplied with a carbon filter and can be found in various widths at competitive prices. Independent systems come with a single or double motor.

• Built-in – This extractor hood is only available in built-in kitchens as they are mounted between wall units and offer an entry door to match your other furniture. These are very popular and expensive units.

• Awning: this type of extractor is installed on a metal or wood awning. They are available in various widths and with one or two motors. Canopy bells are generally considered quite a decorative piece.

• Ceiling mounting: these are installed directly on the ceiling. They are similar to a canopy hood, but larger and more powerful and usually come with a convenient remote control.

• Island and Fireplace – These high-tech models are highly visible, expensive, and often make a contemporary focal point in your kitchen. Island and fireplace hoods feature fluorescent or halogen lamps and are equipped with fan motor systems that provide high levels of performance. They also offer mounted accessories like back plates, utensil rails, and spice racks to further enhance their appearance.

Range Hood Troubleshooting

Before calling a repair professional because your new installation won’t work, check out the following tips:

• Verify that the unit is plugged in and in the on position.

• Is the duct the correct diameter or equivalent area based on the size of the hood?

• Make sure the conduit is not pinched or kinked anywhere.

• If there is a type of counter-draft shutter that has been installed at either end, make sure it opens and closes when you turn the fan on or off. • The last of the Elica puller installation tips is to check for debris that could have jammed during installation.